Resin Bond Driveway Kit 17.5kg (Scattercoat System)

We always aim to get your order to you as quickly as possible. Estimated delivery time is 2-3 working days from day of dispatch. Unfortunately, we cannot guarantee next day delivery.

This depends on the temperature of your working conditions and how much catalyst has been incorporated into the mix. Warmer temperatures will reduce your curing time and colder temperatures will increase the length of cure.  Likewise, adding extra catalyst will speed up the curing process - often necessary for colder temperatures and reducing catalyst will reduce curing - again often necessary during warmer temperatures. We would recommend mixing no more than 1.5 - 2kg at a time. Once the resin and catalyst are mixed, the curing process will begin and you are working against the clock to get the resin applied - usually no more than 20 minutes. Only mix as much as you need.  Epoxy Resin is mixed on a ratio basis and should not be altered. Room temperature is the ideal scenario for curing. Each resin type will differ so we would always recommend referring to the MSDS and TDS available on each product listing before use.  Although some resins may be hard to the touch after 24 hours, some may not be fully cured for up to 3 days. Again, this information will be available on the product Technical Data Sheet... Read more

Question:I'd like to buy one of your resin driveway kits. Can you advise why the driveway aggregate comes in two different sizes? (1-3mm and 2-5mm) Answer:If you are going with the Resin Bonded Driveway System (spread resin and scatter aggregate) then you will only need the 1-3mm as it is small enough to stick. If you use any bigger, there is not enough of the stone surface stuck in the resin which will result in stones becoming loose over time. If you go with the Resin Bound Driveway System, which is a fully mixed system, you will require both sizes of the stones to create a tighter bond for laying at 12-18mm thick (12mm min for pathways and 18mm min for driveways). The bounded system is laid thicker therefore it must be porous enough for water to pass through, whilst tight enough not to have big gaps. The 1-3mm and 2-5mm stones will bind together perfectly with the resin to create this bounded... Read more